Social Recruitment
Digital front-end
Digital back-end class
Simulation development class
Solution class
- Digital IC architecture
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Responsible for chip specification demand definition, competitive product analysis and industry insight.
2 - Responsible for chip architecture design and IP selection, and output the overall scheme document.
3 - Be responsible for the evaluation and decision-making of chip area, power consumption, performance, etc., and jointly design, back-end and other departments to optimize the chip PPA.
4 - Solve end-to-end technical problems of chips with other departments, including back-end, packaging, chip testing and system joint debugging.
Job requirements:
1. Major in electronics, communication, computer, semiconductor physics or microelectronics, bachelor degree or above, and 3 years or above of experience.
2 - Be familiar with ARM SoC system, AMBA bus protocol, HSM hardware security module, ETH/CAN/LIN/SENT and other interfaces.
3 - Be familiar with the front and rear processes of the chip, including design, synthesis, DFT, back-end and other processes.
4 - Deeply understand chip PPA optimization, and have in-depth understanding and development experience in low-power design and optimization is preferred. 5 - Experience in vehicle specification and SoC system chip architecture design is preferred.
- Digital IC Design
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Complete the digital detailed design according to the chip system design specification.
2 - Be responsible for the design and optimization of digital circuit RTL, and complete the output of corresponding design documents.
3 - Be responsible for module timing and area optimization.
4 - Participate in FPGA prototype verification.
Job requirements:
1. Bachelor degree or above in electronics, communication, computer, semiconductor physics or microelectronics.
2 - Proficiently master verilog/system verilog, and can independently complete digital circuit design.
3 - Be familiar with the design process of digital front-end, including synthesis, formal verification, timing analysis, etc.
4 - Be familiar with ARM SoC system, AMBA bus protocol, HSM hardware security module, ETH/CAN/LIN/SENT and other interfaces.
5 - Experience in vehicle specification and SoC system chip design is preferred.
- Digital IC verification
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Responsible for the formulation of validation strategy, scheme and test case.
2 - Develop the verification platform, use Verilog, System Verilog, UVM and other languages/tools to achieve efficient chip function and performance verification, and complete verification execution and debugging.
3 - Be responsible for the verification progress and quality, and be able to undertake specific technical tasks.
4 - Be able to cooperate with design and software engineers in FPGA platform and prototype verification and debugging.
Job requirements:
1. Bachelor degree or above in electronics, communication, computer, semiconductor physics or microelectronics.
2 - Have a solid foundation of IC verification, be familiar with the environment and process of IC design verification, master VCS/NC Sim and other relevant verification tools, and master one or more verification languages.
3 - Familiar with Python/Perl/Makefile and other editing tools and scripting languages.
4 - Have verification experience of vehicle specification and SoC system chip is preferred.
- Digital IC Physical Implementation
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Be responsible for static timing analysis, including special timing confirmation, and cooperate with the front-end to complete the optimization of critical timing path of the module, solve congestion problems, and meet the input conditions of the back-end physical implementation.
2 - According to the comprehensive results, guide the back-end to achieve area division, module layout, and solve congestion problems.
3 - Be responsible for module integration and formal verification.
4 - Participate in the power consumption analysis of the module, and complete the power consumption optimization and area optimization of the module together with the design and back-end.
5 - Participate in the iteration of timing convergence after back-end layout and routing and the formulation of sign off standards.
Job requirements:
1. Major in electronics, communication, computer, semiconductor physics or microelectronics, bachelor degree or above, and 2 years or above of experience.
2 - Proficient in chip synthesis, timing analysis and formal verification, familiar with DFT and back-end implementation.
3 - Skillfully use Tcl/Perl/Python and other scripts to establish automatic processes.
4 - Experience in physical realization of advanced process nodes at 28nm and above is preferred.
5 - Experience in physical implementation of vehicle specification and SoC system chip is preferred.
- Digital IC DFT
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Be responsible for or participate in the development of DFT test plan.
2 - Responsible for DFT implementation, including Scan, Mbist, ATPG, Boundary Scan, etc.
3 - Complete the simulation verification of DFT test vector.
4 - Cooperate with the front-end and back-end development teams to complete the Timing/Power IR analysis and convergence related to the chip design process.
5 - Generate test vectors, and assist ATE test team in failure analysis after streaming, including vector debugging, coverage optimization, and solving problems encountered in testing.
Job requirements:
1. Major in electronics, communication, computer, semiconductor physics or microelectronics, bachelor degree or above, and 2 years or above of experience.
2 - Be familiar with Synopsy or Mentor DFT and other related EDA tools.
3 - Master the DFT circuit knowledge related to BSCAN, SCAN, MBIST and LBIST, and master the timing analysis method.
4 - Have experience in ATPG and DFT simulation verification, and have the ability to analyze problems independently.
5 - Skillfully use scripts such as Tcl/Perl/Python to establish automatic processes.
6 - Experience in DFT development of 28nm and above advanced process nodes is preferred.
7 - Experience in DFT development of vehicle specification and SoC system chip is preferred.
- Digital IC back-end
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Be responsible for the physical design of modules from RTL to GDS, including floorplan/powerplan/place/CTS/route, etc.
2 - Be responsible for timing convergence and signoff of the module, including timing analysis/signoff SI analysis/fix/formal/low power verification, etc.
3 - Be responsible for physical verification of modules, including DRC/ANT/LVS/IR/EM/ESD, etc.
Job requirements:
1. Major in electronics, communication, computer, semiconductor physics or microelectronics, bachelor degree or above, and 2 years or above of experience.
2 - Proficient in the back-end physical design process from RTL to GDSII, and proficient in using mainstream EDA tools.
3 - Have relevant experience in Floorplan, P&R, STA, Physical Verification, etc.
4 - Skillfully use scripts such as Tcl/Perl/Python to establish automatic processes.
5 - Experience in back-end development of 28nm and above advanced process nodes is preferred.
6 - Experience in back-end development of vehicle specification and SoC system chip is preferred.
- Analog IC design
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Participate in the formulation of analog IC specifications, be responsible for circuit design and simulation verification, and prepare circuit design documents.
2 - Be responsible for line optimization.
3 - Assist layout design engineer to complete analog IC layout design.
4 - Compile product test specifications, and assist test engineers in formulating test plans.
Job requirements:
1 - Major in electronics, semiconductor physics or microelectronics, bachelor's degree or above, 1 year or above experience.
2 - Have a deep understanding of semiconductor devices and process flow.
3 - Have a good foundation of analog circuit design, and be familiar with EDA tools and design process of analog circuit design.
4 - Development experience in power management, LDO, BUCK, ADDA and communication interface is preferred.
- Analog IC layout
Number of recruiters: several
Salary: 30K-60K/month
Work address: Chongqing/Chengdu
Job description:
1 - Layout design of analog/mixed signal circuit module.
2-Circuit module and chip floor plan.
3 - Circuit module, full chip DRC, LVS, etc.
Job requirements:
1 - Major in electronics, semiconductor physics or microelectronics, bachelor's degree or above, 1 year or above experience.
2 - Have analog circuit/digital circuit knowledge, understand semiconductor physics and semiconductor device knowledge.
3 - Have a good command of EDA circuit design software for analog layout, and be familiar with basic layout design rules.
4 - Experience in layout design of high-precision, high-speed digital analog mixed signal, RF, etc. is preferred.
- Hardware Engineer
Number of recruiters: several
Salary: 15K-45K/month
Work address: Chongqing/Chengdu
Job description:
1 - Carry out detailed design, schematic design and review according to project needs, and guide PCB design.
2. Board logic and component selection are designed based on Verilog.
3 - Complete the debugging verification and unit test of the circuit board, and locate and solve various hardware problems of the board.
4 - Complete the output of detailed design, unit test and other documents during the development process.
Job requirements:
1. Major in electronic information, computer, communication, etc., bachelor degree or above, and 2 years or above of experience.
2 - Have basic hardware knowledge such as signal integrity and power integrity.
3 - Be proficient in mainstream schematic diagram and PCB design tools, and use oscilloscope and other common equipment.
4 - Hardware development experience in vehicle specification and SoC system field is preferred.
- software engineer
Number of recruiters: several
Salary: 15K-45K/month
Work address: Chongqing/Chengdu
Job description:
1 - Responsible for the development, transplantation, integration and testing of auto controller BootLoader and BSP.
2 - Prepare software architecture scheme, design documents, test cases, test documents and other relevant materials.
3 - Participate in the development, maintenance and updating of design standards and specifications of the software department.
Job requirements:
1 - Bachelor degree or above, major in computer, software engineering, etc., with 2 years or more experience.
2 - Proficient in C, GCC, Makefile and other languages and tools, and familiar with one of C++, C #, Python is preferred.
3 - Have rich experience in code writing, and be able to skillfully and independently complete one or more application development of ARM architecture system kernel, device tree, system boot BootLoader, BSP, etc.
4 - Know FreeRTOS, uCos and other embedded real-time operating systems, familiar with MCAL configuration, and experience in AUTOSAR and OSEK product development is preferred.
5 - Software development experience in vehicle specification and SoC system field is preferred.
Resume delivery method:
Phone/WeChat:15730287339 / 13688069316
Mailbox:recruitment@lanshanae.com